Product Description The operation is simple, the operation speed is very fast, and it is not easy to hurt the hands, even beginners can quickly adapt to it. Usage Steps 1、Holding: suppoutlng the bottom of the machine.with the fourfingers of you rright hand and them putting your thumb on the top ofthe machine for holding the machine tightly.(fig 1)2、Threading: (fig 1)drawing the lisle softly from the bobbin and threading it from winding A, andthe put it in the tension controller B. Then threading it through the winding C. Putting the top of the lislebeside the needle, and then threading the lisle through the needle by using the threader. 2-3 centimetre.(fig 1) 3、Lift up the clothe fastening plate with right forefinger andputting the cloth (less thean 0.8mm gauge) under the fastening plateand then setting down the fastening plate. (fig 2)4、Pressing the top of the machine up and down and do over, then the right hand should move toright step by step and lat left hand hold the cloth the controll the direction.(fig2) 5、You can adjust the bolt for the optimal habitus ,adjust nut fig 1(b).6、Drawing prolate distaff and thread spindle if you want to ch-ange an big clew. After threading again and readjusting the tight andloose of lisle，you can sewing again. 50#-90#. (fig3) 7、Loose the setscrew with as crewdriver and take off the oldneedle. Notice to let the flat part of needle face the invariantsetscrew. Correct direction and position of needle. DHX-14(fig4) It is very suitable for repairing clothes on the go and on the spot, both beginners and experienced people can easily make some DIY crafts according to their needs. It is very suitable for repairing clothes on the go and on the spot, both beginners and experienced people can easily make some DIY crafts according to their needs.